N-ANN Series

N-ANN-80C, N-ANN-I/O, N-ANN-LED, N-ANN-LED-R, N-ANN-LED-W, N-ANN-RLY
The N-ANN-Series provides a comprehensive line of annunciators, relay and driver modules to interface with a compatible fire alarm control panel.

The N-ANN-LED and the N-ANN-80 annunciator replicates general system faults and input zones/points when used with a compatible fire alarm control panel. The N-ANN-I/O is an LED driver module that can be used in a wide variety of applications including as an interface with the FACP to drive most customized graphic annunciators. The N-ANN-RLY relay module provides 10 programmable Form-C relays when used with the FACP.

Features & Benefits:

N-ANN-LED

  • Includes three LEDs for each zone: Alarm, Trouble and Supervisory
  • N-ANN-RLED includes all red LEDs for alarm only annunciation
  • Compatible with the NFW-50(C), NFW2-100(C), SFP-5UD(C), SFP-10UD(C), RP-2001(C), RP-2002(C)

N-ANN-80C

  • Backlit 80-character LCD display (20 characters x 4 lines)
  • Up to eight N-ANN-80s can be connected on the ANN-BUS
  • Control switches for System Acknowledge, Signal Silence, Drill, and Reset
  • Displays device type identifiers, individual point alarm, trouble, supervisory, zone, and custom alpha labels

N-ANN-RLY

  • Connects to the ANN-BUS terminal on the FACP and requires minimal programming
  • Ten Form-C relays can be programmed for various functions; Alarm, Trouble, Supervisory, AC Loss, Waterflow Delay, Input Zones and Silenceable Alarm
  • Up to eight ANN-BUS devices may be connected to the ANN-BUS of each FACP

N-ANN-I/O

  • Connects to the ANN-BUS terminal on the FACP and requires minimal programming
  • Each N-ANN-I/O module drives up to 40 LEDs

Specifications

N-ANN-LED

  • Maximum ANN-BUS Voltage: 24 VDC
  • Maximum Current: Alarm: 68 mA Standby: 28 mA
  • Maximum wiring distance from FACP: 6,000 ft. (1,829 m.)

N-ANN-80C

  • Operating voltage range: 18 VDC to 28 VDC.
  • Current consumption @ 24 VDC nominal (filtered and nonresettable):40 mA maximum.

N-ANN-RLY

  • Maximum ANN-BUS Voltage: 24 VDC
  • Maximum Current: Alarm: 75 mA Standby: 15 mA

N-ANN-I/O

  • Maximum ANN-BUS Voltage: 24 VDC
  • Maximum Current: Alarm: 200 mA, Standby: 35 mA, Each LED: 10mA
  • Maximum wiring distance from FACP: 6000 ft. (1829 m.)

Listings:

N-ANN-LED

  • UL: S635
  • ULC: S635 (N-ANN-LED only)
  • FM approved
  • CSFM: 7120-0028:0259
  • MEA: 333-07-E
  • Fire Dept of NY: COA #6177

N-ANN-80C

  • UL: S635
  • FM approved
  • CSFM: 7120-0028:240
  • MEA: 442-06-E Vol. 2

N-ANN-RLY

  • UL: S635
  • FM Approved
  • Fire Dept. of New York: #COA 6177
  • CSFM: 7165-0028:0245; 7165-0028:0246

N-ANN-I/O

  • UL: S635
  • CSFM: 7120-0028:242
  • MEA: 442-06-E Vol. 2

Resources

Basket Size :
0MB out of 50 Mb

Document Name Asset Type Type & Size Modified Date
Brochures pdf | 1.32MB 05/02/2017
Brochures pdf | 3.10MB 05/02/2017
Data Sheets pdf | 0.13MB 05/02/2017
Data Sheets pdf | 0.11MB 05/02/2017
Data Sheets pdf | 0.08MB 05/02/2017
Data Sheets pdf | 0.13MB 05/02/2017
Data Sheets pdf | 0.13MB 05/02/2017
Data Sheets pdf | 0.07MB 05/02/2017